Do you’ve got a Geek Bar Pulse that’s not hitting? On this easy information, we’re going to elucidate the best way to repair it.
Fixing a Geek Bar Pulse that isn’t working is often a easy course of so long as the system isn’t broken or out of e-liquid – and determining what you need to do is mainly a matter of evaluating what’s occurred with the system lately. Has the vape ever labored? Was there an accident? Was the system working usually till it all of a sudden stopped? Based mostly on what occurred earlier than your Geek Bar Pulse stopped hitting, the following steps ought to turn out to be clear pretty simply.
Right here’s what you might want to do.
Make Certain You’ve Unboxed the Geek Bar Pulse Appropriately and Turned It On
In case your Geek Bar Pulse has by no means labored, the very first thing you need to do is consider whether or not you’ve unboxed it appropriately. Just be sure you’ve eliminated the silicone plug from the mouthpiece and moved the swap on the underside of the system out of the “Shut” place. When the “Shut” possibility is chosen, the system is turned off and won’t work. You may also strive resetting the Geek Bar Pulse by turning it off and again on.
Does the system’s display gentle up once you flip the swap? In that case, it’s attainable that your system’s puff sensor is caught or isn’t working appropriately. You may be capable of get it working by puffing on the system a bit extra firmly. Puff sensors for vapes are easy mechanisms, and so they’re manufactured very cheaply. It’s attainable to get a dud every so often.
Make Certain the Battery Isn’t Useless
One of many enjoyable options of the Geek Bar Pulse is its good show, which features a battery meter. Does the meter say that the battery is useless? In that case, that’s why your Geek Bar Pulse isn’t hitting. You may join the system to your laptop with a USB-C cable to cost the battery.
Observe that in case your vape’s battery is totally useless, there won’t be ample voltage remaining within the cell to show the system’s display on – so even when the display is totally darkish, charging the battery continues to be a legitimate troubleshooting step.
While you join the Geek Bar Pulse to your laptop, the display ought to illuminate, and the battery meter ought to start ticking up. If that doesn’t occur, wait a couple of minutes earlier than troubleshooting additional as a result of the battery may simply be extraordinarily low.
In case your Geek Bar Pulse nonetheless isn’t lighting up after you’ve waited some time, the battery more than likely isn’t charging. Right here’s what you need to strive subsequent.
Exchange the charging cable. You may be utilizing an previous cable that now not delivers energy reliably.
Join the Geek Bar Pulse to a unique energy supply. It’s all the time greatest to cost your vape by means of your laptop. When you’re already utilizing a pc, strive a unique laptop. Don’t cost any vaping system with a wall charger that’s not particularly authorised by the system’s producer.
Clear the charging port. You need to use a toothpick to take away lint and mud from a USB port.
Test for Injury
Did your Geek Bar Pulse cease hitting after a selected occasion? When you dropped your vape in water or on a tough floor – and it stopped working instantly afterwards – it’s possible that the system is broken. Though it’s very possible that you just’ll want to exchange your vape, there are a few steps that you may doubtlessly take to resolve the issue. Begin by flipping the swap on the underside of the system to the “Shut” place to show your vape off. After you’ve achieved that, observe the beneath steps.
When you dropped the system in water, seal it in a plastic bag with desiccant or unscented cat litter for a day or two. If moisture contained in the Geek Bar Pulse is inflicting your vape to not perform, the desiccant may be capable of take away sufficient of the water to make the system work once more.
When you dropped the system on a tough floor, it’s attainable that the system isn’t working due to a slight misalignment of its inside parts. You could possibly get your Geek Bar Pulse to start out working once more by tapping it in opposition to your hand just a few occasions. If the system nonetheless isn’t working, you’ll want to exchange it.
Consider Whether or not Your Geek Bar Pulse Is Out of E-Liquid
If not one of the steps on this article have labored for you – and also you’re positive that your Geek Bar hasn’t stopped working due to an accident – it’s very possible that your system is just out of e-liquid. When your vape is operating low on vape juice, it’s often pretty apparent as a result of the system’s cloud manufacturing and taste high quality will each endure. You’ll begin to get wispy clouds that both style a bit like a bit like plastic or that style like nearly nothing in any respect.
When your Geek Bar Pulse is totally dry, it might produce a really burnt taste once you hit it, or it might produce no vapor by any means. At this level, you’ll know that it’s undoubtedly time to exchange your system.
Though the Geek Bar Pulse is marketed to ship as much as 15,000 puffs, it’s vital to do not forget that you’re not prone to get precisely that variety of puffs out of the system in real-world utilization. That’s as a result of the marketed puff depend is predicated on very particular situations that usually contain puffing on the system for only a half second at a time. Additionally, utilizing the system in Pulse Mode consumes the e-liquid provide twice as shortly.
The marketed puff depend would appear to suggest that you should utilize a Geek Bar Pulse for weeks earlier than it runs out of vape juice, which is extraordinarily unlikely for most individuals – however it’s undoubtedly honest to count on that you just’ll a minimum of get a number of days out of it.
Wrapping Up
Let’s recap what you’ve discovered right now about fixing a Geek Bar Pulse that isn’t hitting. We hope that you just’ve been capable of repair your system and get again to vaping.
In case your system has by no means labored, be sure that it’s turned on and check out puffing a bit extra firmly.
In case your system stopped working whilst you have been utilizing it, strive charging the battery.
In case your system stopped working after you dropped it, take acceptable steps primarily based on whether or not it was dropped on a tough floor or in water.
In case your system started dropping its taste high quality earlier than it stopped working, it’s most likely out of e-liquid.
